Seal Once Semi-Transparent Tints

All surfaces should be cleaned before sealing for best penetration and performance.

Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners. Recommend Seal-Once All Wood Cleaner.

Test absorbency after cleaning by sprinkling water on surface. If the water does not readily penetrate the surface, stripping will be necessary to remove old coatings.

Do not use if air or surface temperature is below 50°F/10°C or above 95°F/35°C.

Do not apply in rain or when rain is expected within 24 hours.

Mix complete contents of tint bottle into gallon can of SEAL-ONCE.

DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.

Test a small area to ensure acceptable appearance and penetration.

Follow the application instructions on the can of your base product (NANO, NANO + POLY, EXOTIC or MARINE).

For best results, apply in the shade and out of direct sunlight.

Apply to all surfaces and ends.

Do not use with other waterproofing products.

Allow approximately 2-3 hours for surface to dry, depending on temperature and humidity.

Allow approximately 24 hours for full cure, depending on temperature and humidity.

When recoating, apply as soon as previous coat has penetrated and surface is damp, not wet. Second coat must be applied within one hour of applying the first coat.

Clean all application equipment with warm soapy water.

Disposal: soap and water cleanup; no special disposal procedure needed.

Store above 32°F/0°C to protect from freezing.

Shelf life (unopened): 3 years

Please refer to the Maintenance & Care instructions for your base product (NANO, NANO + POLY, EXOTIC or MARINE).